top of page
Maintenance Inspections.jpg

  • Maintenance inspections are typically scheduled at specific intervals or based on the vehicle's mileage. Common intervals include 5,000 miles, 10,000 miles, or every six months, depending on the manufacturer's recommendations.

Scheduled Intervals:

  • Maintenance inspections involve a thorough examination of various vehicle components, including the engine, transmission, brakes, suspension, steering, electrical system, fluids, and more.

Comprehensive Assessment:

  • Fluid levels (engine oil, transmission fluid, brake fluid, coolant, power steering fluid, etc.) are checked, and necessary changes or top-ups are performed.

Fluid Checks and Changes:

  • Air filters, oil filters, fuel filters, and cabin air filters are inspected and replaced if necessary.

Filter Replacements:

  • Tires are checked for proper inflation, tread wear, and overall condition. Rotation and balancing may be performed.

Tire Inspection:

  • A comprehensive examination of the braking system, including brake pads, rotors, calipers, and brake fluid, is conducted.

Brake System Inspection:

  • Components such as shocks, struts, control arms, tie rods, and bushings are inspected for wear and damage.

Suspension and Steering Inspection:

  • The battery, alternator, starter, and other electrical components are tested to ensure they are functioning properly.

Electrical System Check:

  • The exhaust system is checked for leaks, damage, or worn-out components.

Exhaust System Inspection:

  • Wheel alignment is checked to ensure proper tire wear and optimal handling.

Alignment Check:

  • Timing belts, serpentine belts, and chains are inspected for wear and replaced as needed.

Belts and Chains Inspection:

  • The radiator, hoses, and thermostat are inspected, and coolant levels are checked and adjusted.

Cooling System Check:

  • Components such as the drive belts, CV joints, and axles are examined for wear and tear.

Drive System Inspection:

  • A visual inspection of the vehicle's exterior is performed, checking for damage, rust, or any issues that may require attention.

Visual Inspection of the Exterior:

Maintenance Inspections 

  • Identifying and addressing issues before they escalate helps prevent major breakdowns and costly repairs.

Preventive Maintenance:

  • Regular maintenance inspections contribute to the longevity and reliability of the vehicle.

Extended Vehicle Life:

  • Properly maintained vehicles tend to perform more efficiently and provide better fuel efficiency.

Improved Performance:

  • Ensuring that critical components, such as brakes and tires, are in good condition contributes to road safety.

Safety Enhancement:

  • Regular maintenance inspections help vehicle owners comply with manufacturer recommendations and, in some cases, regulatory requirements.

Regulatory Compliance:

Benefits of Maintenance Inspections:

  • Refer to the vehicle manufacturer's maintenance schedule to determine the recommended inspection items and intervals.

Review Manufacturer Recommendations:

  • Review the vehicle's service history to identify any recurring issues or components that may need special attention.

Document Previous Service:

  • Conduct a visual inspection of the vehicle's exterior, looking for signs of damage or wear.

Visual Inspection:

  • Check fluid levels and condition, and perform fluid changes or top-ups as needed.

Fluid Checks and Changes:

  • Inspect and replace air filters, oil filters, fuel filters, and cabin air filters.

Filter Replacements:

  • Check tire pressure, tread wear, and condition. Rotate and balance tires if necessary.

Tire Inspection and Maintenance:

  • Examine brake pads, rotors, calipers, and check brake fluid levels.

Brake System Inspection:

  • Inspect shocks, struts, control arms, tie rods, and other components.

Suspension and Steering Inspection:

  • Test the battery, alternator, starter, and other electrical components.

Electrical System Check:

  • Check for leaks, damage, or worn-out components in the exhaust system.

Exhaust System Inspection:

  • Verify wheel alignment to prevent uneven tire wear.

Alignment Check:

  • Examine timing belts, serpentine belts, and chains for wear and replace as necessary.

Belts and Chains Inspection:

  • Inspect the radiator, hoses, thermostat, and check and adjust coolant levels.

Cooling System Check:

  • Examine drive belts, CV joints, and axles for wear and address any issues.

Drive System Inspection:

  • Document the results of the maintenance inspection, including any identified issues and the actions taken.

Documentation:

​Process of Conducting a Maintenance Inspection:

Contact Us

bottom of page